Fraud Blocker

Choosing a Scrubber Squeegee

Choosing a Scrubber Squeegee
Floor Scrubber

When choosing a scrubber squeegee, selecting a product with the right pitch is important. This way, the blades will be angled at an even angle all around the floor. This prevents air leaks and prevents water from being left on the floor. While you may be tempted to go for a straight-up squeegee, this won’t work either. Ideally, your squeegee should be pitched at about 30 degrees. A blade with an even pitch will also help prevent water from collecting on the floor.

Floor Scrubber
Floor Scrubber

Choosing the right squeegee

One important aspect of choosing the right scrubber squeegee for your cleaning needs is the material it is made of. Some are made of plastic, while others are made from cast aluminum. Choosing the right material for your cleaning needs will ensure you get the best cleaning results.

The material used in a scrubber squeegee should be durable and resistant to chemical agents. The squeegee’s blade should be narrower than the surface it is used on so that it can pick up more water. Also, the squeegee should have an edge against the floor to remove dirt and debris.

Scrubbers typically have a squeegee attached along the sides and rear of the scrubber to funnel water and cleaning solution to the internal vacuum and recovery tank. The squeegee must be properly installed and maintained to ensure effective cleaning. If it is not attached properly, the water and cleaning solution will run down the sides of the floor instead of picking it up.

The squeegee blades should be cleaned regularly. Dirt and oils can build up on the blade and cause streaks on the floor. You should also wipe them frequently with a cloth to remove any debris. In addition, make sure that the recovery tank is secured. If air leaks in the recovery tank, the squeegee will not perform as effectively.

Scrubber squeegees are made from a variety of materials. One type is made from natural rubber and is red. The other type is urethane, which is more durable and chemical resistant. Both materials are suitable for many cleaning jobs.

Floor Scrubber
Floor Scrubber

Checking for tears

If you’re using a scrubber squeegee on your floor, you may want to check for tears frequently to ensure the squeegee is functioning as intended. If the blades start waning, it’s time to replace them with oil-resistant Primothane squeegees. Regular i-mop squeegees are made of Red Linatex, which is not ideal for oily environments. You can find the product codes for replacement squeegees in the i-mop xl Accessories Guide.

When inspecting a scrubber squeegee for tears, pay special attention to its edges and corners. Ideally, the edges are square and unbroken. The edges of a brand-new squeegee will display a square angle, while a worn squeegee will display a slope-like angle. If you notice a slope-like angle, replace the squeegee immediately.

Rotating squeegees

The squeegees of a rotating scrubber work in a similar manner as a brush in cleaning the floor. The front squeegee contacts the floor surface while the rear squeegee does not. The front squeegee has a small opening for air to enter, carrying the dirty water up through the plenum chamber and through connection 48.

A rotating squeegee is easy to use and can clean floors on all four sides. The blades of the squeegee can also be rotated easily without any tools. Rotating the blades helps to extend their life span. You should rotate the squeegee blades every 20 hours.

The squeegee blades should be checked regularly to determine if they need to be replaced. Ideally, the blades should be replaced after reaching the fourth edge. Buying OEM squeegees is the best option, as these are specifically made for the cleaning machine. Avoid looking for second-hand squeegees that may not provide the same quality of cleaning.

Rotating scrubber squeegees are made of a flexible rubber-like material. They have an outer lip for spreading cleaning solutions and an inner lip for collecting debris. The blades are attached to the housing so they reach almost the floor.

Cleaning squeegees is an essential part of regular maintenance. Dirty squeegees do not remove water very well and can cause streaks. Cleaning them regularly is also essential for keeping the squeegees from getting bent. Cleaning your squeegees regularly will help you save money in replacement costs and time, and effort.

Choosing urethane squeegees

If you’re in the business of cleaning oily or rough surfaces, you might want to consider a urethane scrubber squeegee. These squeegees have an oil-resistant, opaque coating that’s easy to spot. They are also ideal for industrial applications.

Urethane scrubber squeegees have greater elasticity than gum rubber, so they’re easier to flex and adhere to the floor’s surface. They’re also the most oil-resistant squeegees on the market. However, they can wear out more quickly than gum-rubber squeegees.

Linatex squeegees are a good choice if you’re looking for the cheapest option. They’re not as rigid and can be used on all types of floors. However, they’re not as chemical-resistant as urethane squeegees, so you’ll need to choose one with a longer wear life if you’re doing a lot of work on oily surfaces.

You should regularly check for tears or warping on the squeegee’s edges and corners. You should buy a new squeegee if they’re not in good condition. Urethane scrubber squeegees should be replaced once they’ve reached their fourth edge.


Products from comarc

Recently Posted

Contact Comarc

Contact Form Demo (#3)
Scroll to Top