Fraud Blocker

2425-1200w Series On-board Floor Scrubber Battery Charger

COMARC provides custom-designed Battery Chargers and Power Supplies, and One-Stop-Shop MRO solutions, providing the most comprehensive service in the industry. We believe we can provide the right battery charger or power supply to meet your needs.

On-board Floor Scrubber Battery Charger

2425-1200w Series On-board Seal Charger

This series of chargers is designed for the sealed structure. It is suitable for flooded lead acid batteries, sealed lead acid batteries, Lithium batteries, NI-MH batteries, Nickle Cadmium batteries, etc. They ate used to cycle charge or floating charge battery packs in electric cars, sightseeing vehicles, patrol vehicles, forklifts, communication, electric power, ships, etc.

Product Parameters Of 2425-1200w Series

We can also provide customized service for you!!! We have more models; you are welcome to inquire!

ModelsRated Voltage for Battery PackMax Output VoltageMax Output current
CMC2425-0124V34V30A
CMC2425-0236V47V25A
CMC2425-0348V68V20A
CMC2425-0460V85V15A
CMC2425-0572V102V12A

Technology Parameters

♦ AC Input Voltage Range:90-264VAC;45-65Hz
♦ AC Input Max Current: 3.8A@220VAC
♦ Power Factor :≥0.99
♦ Efficiency:≥94.0%
♦ Noise:≤45dB
♦ Protection: IP45

Size and Weight&temperature

♦ Net Weight:1.7kg
♦ Operating Temperature:—30℃—65℃
♦ Storage Temperature:—40℃—95℃

Technology Parameters of 2425-1200w Series On-Board Seal Charger
Features of 2425-1200w Series On-Board Seal Charger

Features of 2425-1200w Series On-Board Seal Charger

♦ Safety
Active PFC and LLC technique is applied for a rapid response on a fault; Quick active software self-protection and reliable passive hardware self-protection on VOLTAGE&CURRENT; Advanced charging strategy is integrated as a safeguard for the battery system.

♦ Reliability
The shell is shaped by extrue Aluminumg technique. The active cooling fan is also designed to be a fan with a potting structure and a longer life. Products of Charger Series have been operating in all kinds of industrial environments (Wet. Hot. Cold. and High altitudes) for more than ten years, and the design is proved to pass the verification.

Functions of 2425-1200w Series On-Board Seal Charger

Triple Colors Indicator is compatible. The vehicle Charging Lock System is compatible. Integrated with an auxiliary power supply for 12V. Meet common standards of charge for EV.

Burnout Protection: The temperature of the charger exceeds the limitation. The charge will low down the power load. If the temperature of the environment exceeds 65℃, the charger will stop charging and switch itself to standby mode until the temperature of the environment goes down.

Protection for Reverse Connection of Batteries: The circuit inside the charger shuts down with batteries when the batteries are connected reversely and will not damage the charger.

NO-load Protection: There is no output when the batteries are not connected.

Short Circuit: The circuit inside the charger shuts down with batteries when the output is short-circuited. The charger will start charging only after troubleshooting and restarting the charger.

Automatic shutdown when fully charging: The charging automatically turns off after the battery is fully charged according to the charger’s judgment.

Functions of 2425-1200w Series On-Board Seal Charger
Scroll to Top
Contact Form Demo (#3)