COMARC is an expert in designing, developing and manufacturing Portable Seal Charger for Floor Scrubber Battery
What is 2414-600w Series Portable Seal Charger?
This series chargers design of sealed structure. It suitable for flooded lead acid batteries, sealed lead acid batteries, Lithium batteries, NI-MH batteries, Nickle Cadmium batteries, etc. They ate used to cycle charge or floating charge battery pack in electric Bumper Car, sightseeing vehicles, patrol vehicles, fork lifts, Floor Scrubber, AGV, ships, etc.
Product Parameters Of 2414-600w Series
We can also provide customized service for you!!! We have more models; you are welcome to inquire!
| Models | Rated Voltage for Battery Pack | Max Output Voltage | Max Output current |
|---|---|---|---|
| CMC2414-01 | 12V | 17V | 30A |
| CMC2414-02 | 24V | 34V | 15A |
| CMC2414-03 | 24V | 34V | 20A |
| CMC2414-04 | 36V | 47V | 15A |
| CMC2414-05 | 48V | 68V | 10A |
| CMC2414-06 | 60V | 75V | 8A |
Technology Parameters
♦ AC Input Voltage Range：180-264VAC；45-65Hz
♦ AC Input Max Current: 3A@220VAC
♦ Efficiency：≥90.0%
♦ Noise：≤45dB
Size and Weight&temperature
♦ Net Weight: 1.4kg
♦ Operating Temperature: —30℃—65℃
♦ Storage Temperature: —40℃—95℃
Features of 2414-600w Series Portable Seal Charger
♦ Safety
Active Two-transistor Forward Technique is Applied for a Rapid Respond on a Fault; Quick Active Software Self-protection and Reliable Passive Hardware Self-protection on Voltage¤t; Advanced Charging Strategy is Integrated As a Safeguard for Battery System.
♦ Reliability
The Shell is Shaped by Extrue Aluminum Technique. and Filled with Special Glue. the Active Cooling Fan is Also Designed to Be a Fan with a Potting Structure and a Longer Life. Products of Charger Series Have Been Operating in All Kinds of Industrial environments (wet. Hot. Cold. High Altitude) for More Than Ten Years, the Design is Proved to Pass the Verification.
Functions of 2414-600w Series Portable Seal Charger
♦ Triple Colors Indicator is compatible. The vehicle Charging Lock System is compatible. Integrated with an auxiliary power supply for 12V. Meet common standards of charge for EVs.
♦ Burnout Protection: The temperature of the charger exceeds the limitation. The charge will low down the power load. If the temperature of the environment exceeds 65℃, the charger will stop charging and switch itself to standby mode until the temperature of the environment goes down.
♦ Protection for Reverse Connection of Batteries: The circuit inside the charger shuts down with batteries when the batteries are connected reversely and will not damage the charger.
♦ NO-load Protection: There is no output when the batteries are not connected.
♦ Short Circuit: The circuit inside the charger shuts down with batteries when the output is short-circuited. The charger will start charging only after troubleshooting and restarting the charger.
♦ Automatic shutdown when fully charging: The charging automatically turns off after the battery is fully charged according to the charger’s judgment.
