COMARC is a professional manufacturer of 1210-300w Sealed Structure Sealed Floor Scrubber Battery chargers for 10 years.
Home » 1210-300w Sealed Structure Sealed Floor Scrubber Battery Charger
1210-300w Sealed Structure Sealed Floor Scrubber Battery Charger
This series chargers design of sealed structure. It suitable for flooded lead acid batteries, sealed lead acid batteries, Lithium batteries, NI-MH batteries, Nickle Cadmium batteries, etc. They ate used to cycle charge or floating charge battery pack in electric Bumper Car, sightseeing vehicles, patrol vehicles, fork lifts, Floor Scrubber, AGV, ships, etc.
Product Parameters Of 1210-300w Series
We can also provide customized service for you!!! We have more models; you are welcome to inquire!
Models | Rated Voltage for Battery Pack | Max Output Voltage | Max Output Current |
---|---|---|---|
CMC1210-05 | 12V | 17V | 15A |
CMC1210-06 | 24V | 34V | 10A |
CMC1210-07 | 48V | 68V | 05A |
Technology Parameters
♦ AC Input Voltage Range:185-270VAC;45-65Hz
♦ AC Input Max Current : 2.0A@220VAC
♦ Efficiency:≥92.0%
♦ Noise:≤45dB
♦ Protection level: IP65
Size and Weight&temperature
♦ Net Weight:1.5kg
♦ Operating Temperature:—30℃—65℃
♦ Storage Temperature:—40℃—95℃
Features of 1210-300w Sealed Structure Sealed Floor Scrubber Battery Charger
♦ Safety
Active LLC technique is applied for a rapid response on a fault; Quick active software self-protection and reliable passive hardware self-protection on VOLTAGE&CURRENT; Advanced charging strategy is integrated as a safeguard for the battery system.
♦ Reliability
The shell is shaped by extreme Aluminum technique. And filled with special glue. The active cooling natural convection longer life. Products of Charger Series have been operating in all kinds of industrial environments (Wet. Hot. Cold. and High altitudes) for more than ten years, and the design is proven to pass the verification.
Functions of 1210-300w Sealed Structure Sealed Floor Scrubber Battery Charger
♦ Triple Colors Indicator is compatible. The vehicle Charging Lock System is compatible. Integrated with an auxiliary power supply for 12V. Meet common standards of charge for EV.
♦ Burnout Protection: The temperature of the charger exceeds the limitation. The charge will low down the power load. If the temperature of the environment exceeds 65℃, the charger will stop charging and switch itself to standby mode until the temperature of the environment goes down.
♦ Protection for Reverse Connection of Batteries: The circuit inside the charger shuts down with batteries when the batteries are connected reversely and will not damage the charger.
♦ NO-load Protection: There is no output when the batteries are not connected.
♦ Short Circuit Protection: The circuit inside the charger shuts down with batteries when the output is short-circuited. The charger will start charging only after troubleshooting and restarting the charger.
♦ Automatic shutdown when fully charging: The charging automatically turns off after the battery is fully charged according to the charger’s judgment.